Welcome to- The Fountain Pen Community!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Under the hood of a Parker 51
DWL


***

Status: Offline
Posts: 2016
Date:
Under the hood of a Parker 51
Permalink Closed


This is another clip I had sitting in photobucket that I shot for Betty a while back. It shows you whats under the hood of a Parker 51 & just how easy it is to service them.

A couple of quick notes on this clip. The settings on my camera were inverted so when I screw/unscrew the shell it's turning in the wrong direction. oops weirdfacebiggrin. Second, when replacing the hood/shell check for nib and shell alignment before applying the shellac.

Enjoy
Dennis



-- Edited by DWL at 12:25, 2007-08-27

__________________

Tu ne cede malis sed contra audentior ito
~Yield not to misfortunes, but advance all the more boldly against them

pip


Newbie

Status: Offline
Posts: 3
Date:
Permalink Closed

How about a video on Hero pens, specifically the Hero 100. They have some left hand threads don't they? Your demonstrations are very helpful.

__________________
DWL


***

Status: Offline
Posts: 2016
Date:
Permalink Closed

Here ya go Pip. This is as close as I could come to a Hero 100.



-- Edited by DWL at 12:26, 2007-08-27

__________________

Tu ne cede malis sed contra audentior ito
~Yield not to misfortunes, but advance all the more boldly against them

pip


Newbie

Status: Offline
Posts: 3
Date:
Permalink Closed

Thanks for your help. There appears to be some differences between the Hero 616 and the Hero 100. The connector ( the metal part that is threaded on both ends and accepts the barrel on one end and the hood on the other) of the Hero 100 has a right hand thread on the barrel side and a left hand thread on the hood side. My problem is that unscrewing the connector from the hood simply allows removal of the sac protector/pressure bar assembly. The collector, feed and nib remain in the hood and it is not apparent to me how to remove them.
I have two Hero 616's, a regular and a jumbo, so you were helpful. The Jumbo is one of my favorites. Thanks for the personal attention, Dennis.

David

__________________
DWL


***

Status: Offline
Posts: 2016
Date:
Permalink Closed

No problem PIP, I'm glad to assist when & how I can.

"There appears to be some differences between the Hero 616 and the Hero 100. The connector ( the metal part that is threaded on both ends and accepts the barrel on one end and the hood on the other) of the Hero 100 has a right hand thread on the barrel side and a left hand thread on the hood side."

It's been a while since I've had a Hero 100 on the bench so I'll take your word for it.
"My problem is that unscrewing the connector from the hood simply allows removal of the sac protector/pressure bar assembly. The collector, feed and nib remain in the hood and it is not apparent to me how to remove them. "

After giving it a good saok or run through an ultrasonic cleanerr, remove the breather tube. Then try grabbing the end of the collector with a pair of hemostats and pulling. It should slide right out.

Dennis


-- Edited by DWL at 13:22, 2007-06-20

__________________

Tu ne cede malis sed contra audentior ito
~Yield not to misfortunes, but advance all the more boldly against them

pip


Newbie

Status: Offline
Posts: 3
Date:
Permalink Closed

Dennis,

     It came apart exactly as you said.  The sac fits on a small plastic collar that screws out of the hood- again with a left hand thread.  The collar has a square portion just beyond the sac nipple that can be grasp to unscrew the collar.  There may be a special tool for use here, but a small hemostat will just fit, and can be used.  Once this collar is removed the collector, nib and feed can be pulled out of the hood. 

    The Chinese did a good job in re-engineering the Parker 51.  The nib fits on the feed only one way. The depth of the nib setting on the feed is also fixed.  The nib/feed assembly goes into the collector only  one way.  Both the angular orientation and depth of the nib/feed assembly are set grooves and lugs on the several parts.  In short, it only goes together one way. 

     Thanks for hand holding.  I've played with this Hero 100 for over a year.  Not knowing its construction, I was afraid to use much force as all the parts are plastic.  It helps alot  to be guided be one who has been there before.

David


__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard